ALUMINUM TURN PLATES

For The Ultimate In
Front End Set Up Accuracy!

*  Low profile, only 1" tall.
*  Fits on top of scale pads.
*  Free floating in 2 directions, for no bind.
*  All new lightweight design - reads to 1/2"

BUMP STEER GAUGE

Here is the most accurate, easiest and quickest way to measure your critical bump steer.  This simplified design uses a single precision dial indicator to tell you directly the exact amount of bump steer within .001".  Everything you need is there:  Wheel plate, adjustable stand, and precision dial indicator.  Use a floor jack or common bottle jack to move the suspension. 

CHASSIS HEIGHT CHECKER

Works in 3 Different Ways

1. Car on the ground - measures chassis height directly, accurate to 1/16".
2. Car on scale pads - measures from top of pads - ground level - to frame directly (no subtracting needed here).
3. Measures chassis height dynamically, as you work on the car. Magnet holds tape to frame. Indicator shows height as the car moves up and down. Use set of 4 to quickly see height at all 4 corners. You don't even need to bend over

24" for perimeter frames
36" for straight rail cars on right side
Measures height from 2" to 10" (higher if needed)
Works 3 ways - with scale pads or without

The Mini Gauge is great for quick, accurate checks of chassis height. Push it under the car, raise the tape with the knob, pull it out, and read the height. Range is 2.5" - 8", accurate to 1/16", read on right side of tape. This is the shortened and simplified version of our Chassis Height Measure 

Measure height while your car is on scale pad.. However it is a great replacement for 'step' type tools, more accurate, more versatile, and at a great price.

Mini Chassis Height Checker
NOTE: 
Reads in metric on left side of tape, 
accurate to 1mm.