Lubrication and Additives

Liquid Assembly Lub

• New, convenient version of the chemistry used in our popular paste sold in tubs
• Prevents metal contact and wear before adequate lubrication can be supplied
• Unlike other assembly lubes, this product will not plug filters after initial engine start-up
• Provides 3x greater film strength than conventional black Molybdenum Disulfide greases
• Excellent rust and corrosion inhibitor, allowing for long-term storage of parts and internal engine components
• Not for use on exhaust bolts or other fasteners associated with high temperature which require an anti-seize
• Recommended and used by top camshaft and drivetrain manufacturers

Water Wetter

• Unique agent for cooling systems that doubles the wetting ability of water
• Rust and corrosion protection allows for use of straight water in racing or reduced antifreeze levels in warm climates
• Improves heat transfer and reduces cylinder head temperature
• May allow more spark advance for increase power and efficiency
• Use one bottle for most passenger cars and light trucks, treats 3 to 5 gallons or 13.2 to 15.9 liters. Vehicles with larger cooling systems should use two bottles. Small cooling systems should use 1oz (3 to 4 capfuls) per quart
• Compatible with new or used antifreeze (including DEX-COOLTM and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems
• Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes

SI-1 Fuel System Cleaner

• Concentrated package of the most powerful high-temp detergents available
• Cleans gasoline fuel injectors, intake valves and combustion chambers
• Can cleans injectors to nearly 100% efficiency in on treatment
• Cleansing effect on injector deposits can raise fuel economy approx 12% or more
• One bottle to a tank can reduce octane requirements by two numbers
• Protects the fuel system from rust
• One bottle treats up to 100 gallons
• Safe for continuous use

2 Cycle Racing Oil

• Ultimate in 2 cycle performance
• Provides improved power and perfect cleanliness
• Power improvements of 3-5% have been obtained in dyno tests
• High temp stability prevents deposits in even the hottest upper ring 
  and piston crown areas
• Suggested use is 50:1 but can be used richer or leaner, up to 100:1 depending on type of engine and operating conditions
• Provides unequal protection in two cycle kart, motorcycles, model airplanes,
  and marine engines as a pre-mix or injection oil